Sliding Shower Glass Door Rollers

5 Major Advantages and Highlights, Quality Assurance

1. No harmful substances, made of 304 stainless steel, free of heavy metals.

2. Durable and not deformed, made of solid material, sturdy and durable, strong bearing capacity and not deformed.

3. Corrosion resistance, surface grinding treatment, corrosion resistance, not easy to rust.

4. Quality assured, factory direct sales, rest assured to buy, worry-free after-sales.

5. The appearance is beautiful, the overall appearance design is simple and generous, and it is more classy.

Carefully cast, there are details to have charm. More stable and more secure, it is fastened with hexagonal bolts, which is convenient for installation at different angles and easy to handle. Castings are made of high-quality materials, with strong stability, not easy to burst, and strong compression resistance, effectively extending the service life.

Warm Prompt

Warm Reminder: This product is made of non-ferrous metals. It is forbidden to use all acid and alkali products for cleaning, otherwise it will cause the surface of the product to corrode. Regular maintenance is recommended.

About Product Maintenance

1. Please keep the metal surface dry. In case of rainy days, please keep ventilated to prevent moisture from contacting the metal surface for a long time.

2. Do not use corrosive detergents and acidic cleaners, such as bleach, vinegar, etc.

3. Use a soft wet towel to wipe the surface. After cleaning, use a dry soft towel to wipe the surface water.

4. If the lock dragon does not rotate flexibly, you can scrape the graphite powder from the pencil, gently blow it into the lock cylinder, and then turn it with the key several times. Do not inject other liquid lubricants.

5. It is recommended to thoroughly clean the edges and corners of the entire product every three months. Long-term deposition of stains is prone to chemical reactions. Regular maintenance can keep the surface gloss and efficient performance for a long time.

Bathroom Door Runners Product Installation Sequence

1. The positioner is connected with the guide rail and then fixed.

2. Connect the tube sleeve to the guide rail and then fix it.

3. The bottom nail of the pipe sleeve is connected to the wall and then fixed.

4. The guide rail sleeve is connected to the bottom nail and then fixed.

5. Install the pipe clamp and the fixed glass to connect with the guide rail and then fix it.

6. Connect the swing stopper to the ground and then fix it.

7. The eccentric wheel is connected with the moving glass and then fixed.

8. Install anti-jumping nails after the eccentric wheel is connected to the guide rail.

9. Please adjust the position of all products to ensure the smooth movement of the glass, and then tighten the screw to fasten the glass.

10. Please install it according to the correct installation process and use it within the normal range, and the hardware should not be in contact with acidic substances.